管箍
产品简介
详细信息
承插焊管帽又名:高压管帽,锻钢管帽,公称通径:1/4"-5" ,DN20-DN200,适用介质:水,蒸汽,石油等材料:321,304,304L,316,316L,15CrMo,12Cr1MoV连接形式:对焊连接.
公称通径 | 承插孔 深度 Depth of Socket | 承插孔 直径 Dimension of Socket | 壁厚 Wall Thickness | 管帽顶厚 End Wall Thickness | 中间长度 The length of midst | 中心至承插孔底 Center to Bottom of Socket | |||||||||
| Cmin | Kmin | 双承口 管箍 Coupling | 单承口 管箍 Half- Coupling | 45°斜三通 Lateral | |||||||||||
| A | H | ||||||||||||||
| DN | NPS | Jmin | d1 | 3000 LB | 6000 LB | 9000 LB | 3000 LB | 6000 LB | 3000 LB | E | F | 3000 LB | 6000 LB | 3000 LB | 6000 LB |
| Sch80 | Sch160 | XXS | Sch80 | Sch160 | XXS | Sch80 | Sch160 | Sch80 | Sch160 | ||||||
| 6 | 1/8 | 10 | 10.7 | 3.2 | 3.5 | - | 5.0 | 6.5 | - | 6 | 16 | - | - | - | - |
| 8 | 1/4 | 10 | 14.1 | 3.3 | 4.0 | - | 5.0 | 6.5 | - | 6 | 16 | 32 | - | 8 | - |
| 10 | 3/8 | 10 | 17.5 | 3.5 | 4.4 | - | 5.0 | 6.5 | - | 6 | 17 | 37 | - | 8 | - |
| 15 | 1/2 | 10 | 21.8 | 4.1 | 5.2 | 8.2 | 6.5 | 8.0 | 11.0 | 10 | 22 | 41 | 51 | 11 | 13 |
| 20 | 3/4 | 13 | 27.4 | 4.3 | 6.1 | 8.6 | 6.5 | 8.0 | 12.5 | 10 | 24 | 51 | 60 | 13 | 14 |
| 25 | 1 | 13 | 34.2 | 5.0 | 7.0 | 10.0 | 9.5 | 11.0 | 14.0 | 13 | 29 | 60 | 71 | 14 | 18 |
| 32 | 1.1/4 | 13 | 42.9 | 5.3 | 7.0 | 10.6 | 9.5 | 11.0 | 14.0 | 13 | 30 | 71 | 81 | 18 | 21 |
| 40 | 1.1/2 | 13 | 48.3 | 5.6 | 7.8 | 11.2 | 11.0 | 12.5 | 16.0 | 13 | 32 | 81 | 98 | 21 | 25 |
| 50 | 2 | 13 | 61.1 | 6.1 | 9.5 | 12.2 | 12.5 | 16.0 | 19.0 | 19 | 41 | 98 | 120 | 25 | 29 |
| 65 | 2.1/2 | 16 | 76.9(73.8) | 7.7 | 12.5 | - | 16.0 | 19.0 | - | 19 | 43 | - | - | - | - |
| 80 | 3 | 16 | 89.8 | 8.3 | 13.8 | - | 19.0 | 22.0 | - | 19 | 45 | - | - | - | - |
| 100 | 4 | 19 | 115.5 | 9.4 | - | - | 22.0 | 28.5 | - | 19 | 48 | - | - | - | - |
备注：
承插管件壁厚外围平均值不低于所列值，最小值于局部区域。