防污环 KZT
产品简介
详细信息
| 适用范围 Application Range | ||||
| 压力 Pressure [MPa] | 温度 Temperature [°C] | 速度 Sliding speed[m/s] | 介质Medium | |
| 标准件Standard | - | -55 +220 | 1.5 | 液压油、阻燃液、水、气 Mineral oil based hydraulic fluids, barely flammable hydraulic fluids, water, air and others. |
| 材料 Material | 载荷 Pressure Pr: N/mm2(Max) |
| PTFE | 15@25°C、12@80°C、8@120°C |
| Type of cutThe Angle Cut is the most frequently used standard type of cut. Rings with Straight Cut are available on request. | 切口类型 斜切口是的切口方式。也可提供直切口 |  | |
| Slot on hatchThe standard KZT@DL doesn’t have slot on the hatch. Rings with slot on the hatch are available on request. | 开口处的圆弧槽 德龙标准的 KZT 在开口处没有圆弧槽。如需要可提供 | ||
订货范例Order Example for standard version:
Bore diameter D=100 mm, Groove diameter d=92 mm, Product Width h=6 mm
缸径D=100 mm，槽底径 d=92 mm，产品宽 h=6 mm
订货号Order Code: KZT 100x92x6
For special design such as Special cut type, Slots on hatch , please indicate.
特别设计如直切口、开口处圆弧槽，订货时请说明
Installation Dimension table based on Metric Size
公制沟槽尺寸（mm）
Bore diameter D=100 mm, Groove diameter d=92 mm, Product Width h=6 mm
缸径D=100 mm，槽底径 d=92 mm，产品宽 h=6 mm
订货号Order Code: KZT 100x92x6
For special design such as Special cut type, Slots on hatch , please indicate.
特别设计如直切口、开口处圆弧槽，订货时请说明
Installation Dimension table based on Metric Size
公制沟槽尺寸（mm）
| 缸径 D H9 | 沟槽底径 d-0.2 | H +0.2 | h |
| 20~60 | D-6 | 5.2 | 5 |
| 63~170 | D-8 | 6.2 | 6 |
| 100~190 | D-8 | 8 | 7.8 |
| 170~360 | D-8 | 8.2 | 8 |
| 80~190 | D-8 | 9.7 | 9.5 |
| 70~150 | D-8 | 15 | 14.8 |