AE 系列单向离合器
产品简介
详细信息
特性及应用：
AE 系列是没行轴承支撑的滚柱式单向离合器，使用时需要有轴承来承受径向及轴向载荷，并且要
存润滑及密封。
外径名义尺寸与标准球轴承相同。
这种离合器的典型使用就是与一个具有相同孔径公差的轴承一起承受。
离合器的内圈用键固定在轴上，外圈由为 R6 等级的正公差。可以压入公差为 H7 的坐孔，传递正向
扭矩时需要有凹槽。
如果坐孔的公差等级为 R6，就不需要键齌、但外圈座必须有足够的强度，避免装配变形。
Characteristics and application:
AE series is not line miler overrunning clutch bearings, when using need to carry the radial and axial load, and put
the lubrication and sealing.Outside diameter nominal size is the same as the standard ball bearing.Typical use of the
clutch is that with a bearing with the same diameter tolerance.Clutch of the inner ring with key fixed on the shaft,
the outer ring by the R6 rank is tolerance.Can be pressed into the tolerance for H7 hole, transfer require a groove
positive torque.If sit hole tolerance grade for R6, but there is no need for key 齌, outer ring must have enough
strength, avoid deformation and assembly
