竖吊钢板起重钳

采用低碳优质合金钢制造，并进行了热处理，性能可靠。
The clamp is made of carbon alley steel and after forge quenched.

用于垂直吊运在吊运过程中避免与他物碰撞，防止脱落。
Can not be bumped to prevent dropping. Vertical only.

所吊运钢板厚度应比开口度小5mm,且一次只能吊一块钢板，不能几块钢板层叠吊运，防止滑脱。
The steel flat thickness should be under 5mm then jaw’s angle, and one flat only to prevent droping.

可单只吊运亦可双只吊一侧使用，其夹角不得大于60度。
The using of the clamp may be one or two in the same side,ａnd the angle should be under60°.

可加横梁吊运，请参照示意图。
Can use the lifting beam,Read chart before use.

◆以上技术参数仅供参考，厂家