气动凝结水回收泵  PNEUMATIC CONDENSATE RECOVERY PUMP

基本知识

    WDV20凝结水自动泵属于一种压力控制泵，主要设计用于不使用电力来泵送冷凝水或其它流体的场合。与传统的电力相比，冷凝水控制泵特别适用于“困难”介质的输送，如高温冷凝水或腐蚀性流体。压力操作的泵，特别是冷凝水自动泵被为是长寿合，很少维修的泵。这种泵由于没有旋转的密封结构，没有电动机和泵叶轮，通常使用寿命是传统电动泵的五到十倍，同时省去了大量的一般性维修。
    1、把高温凝结水送回锅炉，节省锅炉给水化学处理剂，减少锅炉给水再加热的费用。
    2、不需要电气维修。
    3、可安全用于危险的或爆炸性的环境。
    4、根据不同的型号，可以用5到250psig（1.72MPa）表压力的蒸汽，压缩空气或其他气体操作控制。
    5、疏液量可达48,000磅/小时（22,000千克/小时）。

Basic knowledge

    WDV20 condensate water automatic pump belongs to a sort of pressure control pump,designed for the occasion where condensate water and other fluid are pumped through the way beyond electric power.Compared with conventional infusion pump,condensate water control pump is very suitable for transmission of "Difficult"medium,such as high temperature condensate water or corrosive fluid.Pressure controlled pump,particular in condensate water automatic pump,are recognized as long-life pump with seldom maintenance needed.The pump is five to ten times the life of traditional ones due to its absence of electromotor, pump impeller and rotary seal structure,at the same time,general maintenance of it will be saved dramatically.

1、It's necessary to return high-temp condensate water into boiler,in order to save boiler water supply and chemical treating agent,ａnd reduce boiler water supply and the cost of reheating.
2、No need to carry out electrical maintenance.
3、It could be used safely in dangerous and explosive environment.
4、It may be used in gauge pressure with capacity from 5 to 250 Psig(1.72MPa)according to different types,ａnd compressed air or other air operation and control.
5、Lyophobe may reach maximum volume of 48,000 pounds/hour(22,000Kg/hr)

运行

Operation

特性

Characteristic

    Automatic pump only has entrance side,ａnd no"Vacuum"side.The key issue is that we shoule be conscious of the fact that such automatic pump in this kind could not pump and suck fluid inside.Medium should flow into the pump in virtue of gravity.The more pressure or hesd is,more bigger the CV value of check valve is,secondly,more bigger the CV value of exhaust valve is,the more faster the pace of completion of side circulation will be.Upon completion of liquid charging,control system will shun down exhaust valve and open intake valve.At the moment,steam and compressed gas will expel the liquid from pump.There are some factors influencing velocity of cicle discharging of liquid,including driving the pressure of steam or air,CV value of check valve of exit back valve,downstream back pressure,along with possibility of flowing medium and temperature of surroundings(In case of taking steam as driving air),The last factor is often ignored,but the fact is that steam will be condensed,therefore,reduce actual driving pressure,such phenomenon could be very serious on some applications.

基本原理      

冷凝水控制泵属于一种压力控制泵，主要设计用于不适用电力来泵送冷凝水或其他流体的场合。与传统的电力疏液泵相比，冷凝水控制泵特别适用“困难”介质的疏液，如高温冷凝水或腐蚀性流体。压力操作的泵，特别是冷凝水控制泵被为是长寿命，很少维修的泵。这种泵由于没有旋转的密封结构，没有电动机和泵叶轮，通常使用寿命是传统电动泵的五到十倍，同时省去了大部分一般性维修。
    1、把高温凝结水送回锅炉，节省锅炉给水化学处理剂，减少制造材料锅炉给水再加热的费用。
    2、泵不需要电气维修。
    3、泵可安全用于危险的或爆炸性的环境。
    4、根据不同的型号，可以用0.5到1.6Mpa表压力的蒸汽、压缩空气或其他气体操作控制。                                 
    5、疏液量可达22，000Kg/h。
    冷凝水控制泵靠蒸汽或压缩气体排出液体。浮球联到连杆上和弹簧上，同时驱动进汽阀和排气阀。在充液循环中，进汽阀关闭，同时排气阀打开，使冷凝水充入泵体内。当浮球随液位升高到其行程的顶点时，开关控制机构放开弹簧，打开进汽阀，关闭排气阀。蒸汽或压缩气体流入泵内，排出液体。装在泵进口和出口的逆止阀，使液体在逆止阀的通路方向上流动。   
Basic principle
    The condensate control pump belongs to a pressure control pump and is mainly designed for situations where electricity is not applied to pump condensate or other fluids. Compared with the traditional water pump, the condensate control pump is especially suitable for the "difficult" medium, such as high temperature condensate water or corrosive fluid. Pressure operated pumps, especially condensate control pumps, are recognized as long - lived, rarely - maintained pumps. Because the pump has no rotary seal structure, no motor and pump impeller, the service life is usually five to ten times of the traditional electric pump, and at the same time, most of the general maintenance is omitted.
    1, the high temperature condensate is sent back to the boiler, the chemical treatment agent of boiler water supply is saved, and the cost of reheating the feed water of the manufacturing material boiler is reduced.
    2, the pump does not need electrical maintenance.
    3, the pump can be safely used in dangerous or explosive environments.
    4. According to the different models, the steam, compressed air or other gas can be controlled by the pressure of 0.5 to 1.6Mpa.
    5. The maximum amount of water thinning up to 22000Kg/h.
    The condensate control pump is discharged from the steam or compressed gas. The floating ball is connected to the connecting rod and the spring, and the intake valve and the exhaust valve are also driven. In the liquid filling cycle, the intake valve is closed and the exhaust valve opens, so that the condensate is filled into the pump body. When the floating ball rises with the level of the liquid level to the point of its stroke, the switch control mechanism opens the spring, opens the intake valve, and closes the exhaust valve. Steam or compressed gas flow into the pump and discharge the liquid. A reverse check valve is installed at the inlet and outlet of the pump to make the liquid flow in the direction of the reverse check valve.

外形尺寸 Shape size

安装及启动操作

    安装
    1、凝结水控制泵的安装位置应保证其上游所有需排入该泵的凝结水均能顺利排入，建议进水压头为12”(305mm)并能够正确引入操作蒸汽或压缩空气。
    2、在引入操作蒸汽时，其管路接口必须设在操作蒸汽主管道的上方，严禁设在主管道下方，以免主管道内的水、杂质等进入操作汽管路。
    3、若凝结水控制泵用来回收多个疏水点排出的凝结水，考虑到不同疏水点排出的凝结水存在不同的余压，为防止不同疏水点间的相互干扰，建议在凝结水控制泵前安装集水罐，集水罐的尺寸确定见表。
    4、凝结水控制泵的进出水口必须装有止回阀，以保证凝结水控制泵的正常运行。建议使用我公司提供的止回阀，以保证泵的排水量。
    5、开式系统凝结水控制泵的安装建议见图。
    6、凝结水控制泵需就位在承载能力大于其满罐时的总重量的地基上。地基表面需平整、干净。
   7、在将凝结水进出管及操作气管接入凝结水控制泵之前必须将系统的管路吹扫干净，以免系统内的污物（如焊渣、铁锈等）进入凝结水控制泵，损坏泵体上的部件，影响泵的正常工作。
Installation and start operation
install
1, the installation location of condensate control pump should ensure that all upstream condensate discharged into the pump can be discharged smoothly, and the recommended inlet pressure head is 12 "(305mm), which can correctly introduce operation steam or compressed air.
2, in the operation of steam, above the pipeline interface must be located in the operation of a steam main pipe, is prohibited under the main pipe is arranged on the main pipeline, to avoid water and impurities into the operation of the steam pipe.
3, if the condensate pump control is used to recover the more hydrophobic point discharge condensate, taking into account the different hydrophobic point exhaust condensation water have different residual pressure, to prevent the mutual interference 
between different hydrophobic, suggested in the condensed water control pump installed before the water collecting tank, collecting tank size is opinion table.
4. The check valve must be installed in the inlet and outlet of the condensate control pump to ensure the normal operation of the condensate control pump. It is suggested that the check valve provided by our company should be used to ensure the drainage of the pump.
5. The installation of the condensate control pump for the open system is shown in the diagram.
6, the total weight of the water pump to control the setting in place carrying capacity is greater than the full of the ground. The surface of the foundation should be smooth ａnd clean.
7, before condensing water enters and enters the condensate control pump, the pipeline of the system must be swept away, so as to avoid contaminants in the system, such as welding slag and rust, and enter the condensate control pump, which will damage the components of the pump body and affect the normal operation of the pump.

启 动
检查确定所有联接处都连接紧密后，开始试运行。
1.对于蒸汽操作场合，打开进汽口侧的疏水管线阀，将管内凝结水排空直至蒸汽出来后关闭该阀。
2.打开出水口阀及排汽口阀。
3.缓慢打开凝结水入口阀，向泵内充水，直至听到较为平缓的充水声后，将入口阀开启。
Start-up
Check and determine that all joints are connected tightly and start to run.
1. for steam operation occasions, drain pipeline valve to open the steam inlet side, the condensed water pipe emptying out after the valve is closed until the steam.
2. open the outlet valve and exhaust valve.
3. slowly open the condensate inlet valve, fill the pump with water until the more gentle sound of water filling, the entrance valve is completely opened.

常见故障排除Common troubleshooting