◎ 型号含义 Type meaning

① 可控硅调压 SCR voltage regulator

② 闭环稳压 Closed-loop stabilizer

③ 负载电压 220V 或 380VAC Load voltage 220V or 380VAC

④ 15A,25A,40A,50A,70A,90A,120A,150A,200A

⑤ 控制电压 0-5VDC Control voltage 0-5VDC

⑥ 控制电流 4-20mA Control current 4-20mA

◎ 产品概述 Product overview

◆ 额定电流：15A-200Amps

◆ 额定电压：220V/380VAC（可选）

◆ 无需外接 +12V 直流电源

◆ 增设闭环（负反馈）稳压系统，能有效稳定电压波动

◆ 绝缘介质电压大于 2000VAC

◆ 支持 4-20mA, 0-5V 自动控制模式，也可手动控制，调节平滑

◆ 内置屏蔽电路，抗力强

◆ 采用大功率晶闸管芯片和 DCB 陶瓷釉锌绝缘底板材料

◆ 性能稳定，可靠性高

◆ Rated current: 15A-200Amps

◆ Rated voltage: 220V/380VAC (optional)

◆ No external +12V DC power supply required

◆ Effectively stabilize voltage fluctuations with closed-loop (negative feedback) voltage regulator system

◆ Insulation voltage greater than 2000VAC

◆ Support automatic control mode (control signal 4-20mA, 0-5V) and manual control mode, and both modes are smooth to adjust

◆ Built-in shielding circuit with strong anti- interference ability

◆ THigh-power thyristor chip, and insulating base plate with DCB ceramic glaze material

◆Stable performance and high reliability

注意 :

1. 当负载电流为 10A 时 , 必须加装散热器 ; 为 40A 及以上时 , 必须加风扇强冷或水冷 .

2. 使用感性负载时 , 务必在输出端并接一个压敏电阻 , 取值为负载电压的 1.6-1.9 倍 .

Notice:

1. If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.

2. When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.

◎ 安装尺寸及接线图 Installation dimensions and wiring diagram