◎ 型号含义 Type meaning

① 控制电压 10-32VDC Control voltage 10-32VDC

② 直流换相 DC Commutator

③ 10A-40A

④ 负载 电压 200VDC Load voltage 200VDC

◎ 产品概述 Product overview

◆ 额定电流：10A-100Amps

◆ 额定电压：200VDC

◆ 低阻抗 MOSFET 输出，限度减少总功耗

◆ " 超低 " 的输入电流

◆ 低输出断态漏电流

◆ 低输出通态压降

◆ 具有 LED 灯 ( 红 )（绿）双色输出指示

◆ 保护性正 / 反向内置联锁功能

◆ Rated current: 10A-100Amps

◆ Rated voltage: 200VDC

◆ Low-impedance MOSFET as the output component minimize the total power consumption

◆ "Ultra low" input current

◆ Low output off-state leakage current

◆ Low output on-state voltage drop

◆ Two color (Red & Green) LED output status

◆ Built-in forward/reverse interlock protection function

注意 :

1. 当负载电流为 10A 时 , 必须加装散热器 ; 为 40A 及以上时 , 必须加风扇强冷或水冷 .

2. 使用感性负载时 , 务必在输出端并接一个压敏电阻 , 取值为负载电压的 1.6-1.9 倍 .

Notice:

1. If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.

2. When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.

◎ 安装尺寸及接线图 Installation dimensions and wiring diagram