品牌
其他厂商性质
广州市所在地
OBS-ONE 是的便携式排放测量系统，专为实际道路条件下的发动机/车辆认证而设计。
它测量排放浓度（CO，CO2，THC，氮氧化物，NO2），颗粒物，空气与燃料比，排气流速率，GPS数据，环境条件（大气温度，湿度和压力），并计算质量排放。
OBS-ONE 采用了高度适应的智能操作平台"HORIBA ONE 平台"，该平台集成了其他 ONE 系列产品数据，优化了测试单元操作。
HORIBA 已开发了广泛的排放测试应用程序，用于认证和发动机/车辆 R&D，例如使用测试自动化系统-STARS 模拟测试单元中的真实驾驶事件。此模拟需要从 OBS-ONE 和驱动器记录器中组合数据。
LDV Type | HDV Type | |||
|---|---|---|---|---|
OBS-ONE | OBS-ONE | OBS-ONE | OBS-ONE | |
CO | ● | ● | ● | ● |
CO2 | ● | ● | ● | ● |
NO/NOx *1 | ● | - | ● | - |
NO, NOx, NO2 *2 | - | ● | - | ● |
THC | - | - | ● | ● |
Exhaust Flow Rate | ● | ● | ● | ● |
Power Requirements | DC 22〜28 V | |||
Power Consumption | Approx. 0.2 kW | Approx. 0.45 kW | ||
Dimensions *4 | Approx. W 350 × D 470 × H 330 mm | Approx. W 350 × D 470 × H 470 mm | ||
Weight (Main unit) | Approx. 32 kg | Approx. 45 kg | ||
Battery *5 | Deep-cycle, sealed lead battery of DC 24 V | Deep-cycle, sealed lead battery of DC 24 V | ||
Operating Conditions | Temperature： -10 to 40 deg.C,*6 Relative humidity： less than 80%, | |||
★NDIR ： Non Dispersive Infrared Detection
CLD ： Chemiluminescence Detection
FID ： Flame Ionization Detection
Measurement Principle★ | Measurement Range | |
|---|---|---|
CO | Heated NDIR | 0-0.5 to 0-10 vol% |
CO2 | Heated NDIR | 0-5 to 0-20 vol% |
NO / NOx | Heated CLD | 0-100 to 0-3000 ppm |
NO, NOx, NO2 | Heated-dual CLD | 0-100 to 0-3000 ppm |
THC | Heated FID | 0-100 to 0-10000 ppmC |
Sampling Method | Wet measurement | - |
Exhaust Fow Rate*7 | Pitot flow meter | 0-2.0 to 0-65.0 m3/min |
Standard Signal Measurements | Exhaust temperature, Exhaust pressure, Atmospheric pressure, Atmospheric temperature, Atmospheric humidity, GPS signal, Speed | |
*1 NO/NOx: Switchable measurement
*2 NO, NOx: Simultaneous measurement NO2: Calculation of NO and NOx
*3 Length of heated inlet tube LDV type: 2 m, HDV type: 5 m, Atmospheric temperature: 20 deg.C
*4 Excluding handle and projection
*5 Nickel hydride battery is an optional unit.
*6 Please contact HORIBA if temperature is below 0 deg.C
*7 Exhaust flow rate can be taken by OBD interface unit
＜Option＞
・OBD interface unit： Supported ISO15765-4/J1939
・External input unit (EIU)： Analog voltage, Analog current, Thermocouple, Platinum resistance temperature detector, Frequency
・Power supply unit (PS)： Power supplied from AC to system
・Power exchange unit (PE)： Can be changed power supply without being powered off
・Heated bubbler unit: Humidifying unit for H2O interference check and H2O quenching effect check
