产品型号：JSB0601

产品名称：石油蜡含油量测定器(JSB0601)

产品说明：

JSB0601石油蜡含油量测定器
一、符合GB/T3554、ISO2908、ASTMD721标准
二、主要技术参数
主机
冷浴孔尺寸：Φ27×150 mm （4孔） 
致冷温度：常温～-40℃（-40℃只在20℃室温环境）
控温精度：±0.5℃
控温方式：数显温控仪测控
功 率：450W
蒸发装置
控制温度：35±1℃
控温方式：电子固态调压器
加热方式：白炽灯泡
功率：100W 
工作电源：AC220V±10％ 50HZ
三、性能及特点：
1、主机采用进口压缩机制冷，制冷量大，降温速度快，在常温下低温度可达-40℃；可在40℃以下的各种环境下工作，适应性强，噪音低。
2、采用数显温控仪自动控温，控温准确，精度高，并可在致冷温度有效范围内任意一点进行调节。
3、仪器主机有4个浴孔，可同时做4个样。 
4、蒸发装置采用白炽灯泡加热，用电子固态调压器调压控温。

JSB0601 petroleum wax oil content tester

I. Comply with GB/T3554, ISO2908, ASTMD721 standards

Ii. Main technical parameters

The host

Cold bath hole size: Φ 27 holes (4) x 150 mm

Refrigerating temperature: normal temperature ~ -40℃ (-40℃ only in 20℃ room temperature environment)

Temperature control accuracy: ±0.5℃

Temperature control mode: digital display temperature controller

Power: 450 w

Evaporation device

Control temperature: 35±1℃

Temperature control mode: electronic solid-state voltage regulator

Heating method: incandescent bulb

Maximum power: 100W

Power supply: AC220V± 10% 50HZ

Iii. Performance and Characteristics:

1. The host machine adopts imported compressor for refrigeration, with large cooling capacity and fast cooling speed. The lowest temperature at room temperature can reach -40℃; Can work under 40℃ in various environments, strong adaptability, low noise.

2. Adopt digital display temperature controller to automatically control the temperature, which is accurate and high in precision, and can be adjusted at any point within the effective range of cooling temperature.

3. The main machine has 4 bath holes, and 4 samples can be made at the same time.

4. The evaporator USES incandescent bulb for heating and electronic solid-state voltage regulator for regulating pressure and controlling temperature.