品牌
其他厂商性质
深圳市所在地
加速度传感器中有一种是三轴加速度传感器，同样的它是基于加速度的基本原理去实现工作的，加速度是个空间矢量，一方面，要准确了解物体的运动状态，必须测得其三个坐标轴上的分量；另一方面，在预先不知道物体运动方向的场合下，只有应用三轴加速度传感器来检测加速度信号。由于三轴加速度传感器也是基于重力原理的，因此用三轴加速度传感器可以实现双轴正负90度或双轴0-360度的倾角，通过校正后期精度要高于双轴加速度传感器大于测量角度为60度的情况。三轴加速度传感器的好处就是在预先不知道物体运动方向的场合下，只有应用三维加速度传感器来检测加速度信号。三维加速度传感器具有体积小和重量轻特点，可以测量空间加速度，能够全面准确反映物体的运动性质。
美国Dytran的3033B2是一款微型三轴加速度传感器/振动传感器，压电式工作原理，重量仅11g，集成石英剪切感应元件，不锈钢外壳材质，适应于小质量的振动监测。
The Dytran 3033B2 is a low profile triaxial IEPE accelerometer with a height of 0.31 inches (7.9 millimeters) and a total weight of 11 grams. Featuring quartz shear sensing elements packaged in a rugged stainless steel housing for improved frequency response, the model 3033B2 is ideal for low mass vibration monitoring.
The model 3033B2 utilizes a 3-foot integral cable and thru hole mounting capabilities. This centralized screw mounting configuration allows for the sensor to be turned 360° prior to securing for ease of sensor installation. If desired, the accelerometer may also be adhesively mounted to the test article.
特性
1. 10 mV/g sensitivity
2. 500g range
3. 1 to 8,000 Hz frequency range (±5%)
4. 3-foot integral cable
5. Thru hole mount
6. 11 grams
7. Stainless steel
8. 360° cable orientation
9. Triaxial
10. IEPE
应用
1. Environmental Stress Screening (ESS)
环境应力筛选
2. Product response testing
产品响应测试
3. General purpose triaxial vibration measurements
一般目的三轴振动测量
WEIGHT (NOT INCLUDING CABLE) 11 GRAMS
SIZE, HxWxD 0.60 x 0.60 x 0.310 IN.
MOUNTING PROVISION, (THRU HOLE IN HSN’G) 4-40 X .420 LONG CAP SCREW
ELECTRICAL CONNECTIONS (3 BNC PLUGS) 3 FT.-8 INCHES LONG CABLE
MATERIAL, HOUSING & CABLE ADAPTOR 300 SERIES STAINLESS STEEL
MATERIAL, CABLE JACKET POLYURETHANE
PERFORMANCE
SENSITIVITY, +/- 20% (Measured at 100 Hz, 1 G, RMS) 10 mV/G
RANGE, F.S. for +/- 5 VOLTS OUT ±500 G's
FREQUENCY RESPONSE, +/- 5% 1 to 8000 Hz
MOUNTED RESONANT FREQUENCY, NOM. 40 kHz
ELECTRICAL NOISE FLOOR, EQUIVALENT .007 G
LINEARITY ±2 % F.S.
TRANSVERSE SENSITIVITY, MAX 5 %
ENVIRONMENTAL
MAXIMUM VIBRATION ±750 G
MAXIMUM SHOCK 1000 G, PEAK
TEMPERATURE RANGE -60 to +250 oF
COEFFICIENT OF THERMAL SENSITIVITY .03 %/oF
ENVIRONMENTAL SEAL EPOXY
ELECTRICAL
COMPLIANCE (SUPPLY) VOLTAGE RANGE +18 to +30 VDC
SUPPLY CURRENT RANGE (From constant current type power unit only) 2 to 20 mA
OUTPUT IMPEDANCE 100 OHMS
OUTPUT VOLTAGE BIAS, NOM. +10 VDC
DISCHARGE TIME CONSTANT, NOM. 0.5 SEC
OUTPUT SIGNAL POLARITY FOR ACCELERATION TOWARD CONVENTIONAL AXES POS
ELECTRICAL ISOLATION, signal/power ground to case >10 MEGW
订货型号
3033B2
相关型号
3313A1
3143D
