◎ 型号含义 Type meaning

① 控制电压 3-32VDC Control voltage 3-32VDC

② 负载电压 480VAC Load voltage 480VAC

③ 10A, 15A, 20A, 25A, 30A, 40A

④ 双组 Dual channel

◎ 产品概述 Product overview

◆ 二组输入，输出 , 插片安装

◆ 额定电流：10A-40Amps

◆ 额定电压：480VAC

◆ 控制电流：≤ 10mA

◆ 背靠背 SCR 输出适合商业级重工业级应用，性能可靠

◆ " 超低 " 的输入电流

◆ 低输出断态漏电流

◆ 低输出通态压降

◆ 具有 LED 灯输出指示

◆ 包含标准输出的 R-C 缓冲器

◆ 两组独立通道，自由控制

◆ Two I/O channels, plug-in installation

◆ Rated current: 10A-40Amps

◆ Rated voltage: 480VAC

◆ Control current: ≤ 10mA

◆ Reverse-parallel SCR as the output component can be used in commercial or heavy industrial applications with reliable performance

◆ "Ultra low" input current

◆ Low output off-state leakage current

◆ Low output on-state voltage drop

◆ Display output status via LED

◆ Standard output R-C buffer

◆ Each channel is independent of the other channel, and all channels are freely controllable

注意 :

1. 当负载电流为 10A 时 , 必须加装散热器 ; 为 40A 及以上时 , 必须加风扇强冷或水冷 .

2. 使用感性负载时 , 务必在输出端并接一个压敏电阻 , 取值为负载电压的 1.6-1.9 倍 .

Notice:

1. If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.

2. When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.

◎ 安装尺寸及接线图 Installation dimensions and wiring diagram