◎ 型号含义 Type meaning

① 控制电压 85-265VAC Control voltage 85-265VAC

② 长条形 Long strip

③ 负载电压 30-480VAC Load voltage 30-480VAC

④ 40A, 60A, 80A,100A, 120A, 125A

⑤ 过零型 Zero-crossing type

⑥ 组合三相 Three phase combined solid state relay

◎ 产品概述 Product overview

◆ 额定电流：40A-125Amps

◆ 额定电压：30-480VAC

◆ 控制电流：并联≤ 30mA，串联≤ 10mA

◆ 背靠背 SCR 输出适合商业级重工业级应用，性能可靠

◆ " 超低 " 的输入电流

◆ 低输出断态漏电流

◆ 低输出通态压降

◆ 具有 LED 灯输出指示

◆ 包含标准输出的 R-C 缓冲器

◆ 配备标准形材工业散热器及轴流风机，散热

◆ 具有过热温控保护

◆ Rated current: 40A-125Amps

◆ Rated voltage: 30-480VAC

◆ Control current: Parallel ≤ 30mA, Series ≤ 10mA

◆ Reverse-parallel SCR as the output component can be used in commercial or heavy industrial applications with reliable performance

◆ "Ultra low" input current

◆ Low output off-state leakage current

◆ Low output on-state voltage drop

◆ Display output status via LED

◆ Standard output R-C buffer

◆ Industrial radiators and axial fans use standard shapes and materials for excellent heat dissipation.

◆ Over-temperature protection

注意 :

1. 当负载电流为 10A 时 , 必须加装散热器 ; 为 40A 及以上时 , 必须加风扇强冷或水冷 .

2. 使用感性负载时 , 务必在输出端并接一个压敏电阻 , 取值为负载电压的 1.6-1.9 倍 .

Notice:

1. If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.

2. When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.

◎ 安装尺寸及接线图 Installation dimensions and wiring diagram

注：特殊电压可定做。Note: Specific voltage can be customized.